<pre id="xlbpv"><sub id="xlbpv"></sub></pre>

          <sub id="xlbpv"><th id="xlbpv"><thead id="xlbpv"></thead></th></sub>
          <nobr id="xlbpv"><meter id="xlbpv"></meter></nobr>

          <var id="xlbpv"><meter id="xlbpv"></meter></var>

            English | 添加收藏 | 設為首頁
            您所在的位置:網站首頁 > > 產品中心 > XLPE絕緣材料 > 硅烷交聯絕緣料1KV及以下二步法硅烷交聯含鹵阻燃絕緣料 SEJ90-2-ZR
            1KV及以下二步法硅烷交聯含鹵阻燃絕緣料 SEJ90-2-ZR
            Two-step Silane Cross-linkable Halogenous Flame-retardant PE Insulation Compound (≤1KV) ...
            型號:0

            參考價:¥

            說明:如您對該產品感興趣,請在此輸入您的手機號將本產品的地址 發送至您手機上。
            Product description 產品描述和用途
            SEJ90-2-ZR is two-step silan cross-linkable PE insulation compound for low-voltage cables. It is a kind of insulations of low-voltage cables and control cables through  squeeze tube mold production process. It is made from silan grafted A, catalyst B and halogenous flame-retardant masterbatch SEJ90-ZR. The density of SEJ90-ZR is 1.82±0.2g/cm3,the proportion between A and B is 95:5. The
            Adding amount of flame-retardant masterbatch changes according to the section surface sizes of the cables (10%~30%). It is mainly suitable for the cables of American Standards like XHH, XHHW, XHHW-2, RHH, RHW, RHW-2 and SIS. Large adding amount for small section surface size, and small amount for large section surface size. The general purposes are to make sure the cables pass horizontal burning test of UL-44. Working voltage for wire and cables are 1KV and below, the highest working temperature is 90℃.
            SEJ90-2-ZR是低壓電線電纜用二步法硅烷交聯聚乙烯絕緣料。主要用于通過擠管式模具生產的低壓電力電纜和工業電纜的絕緣。該材料由硅烷接枝A料、催化劑B料、含鹵阻燃母粒SEJ90-ZR 三部分組成,阻燃母粒密度為1.82±0.2g/cm3,接枝A料和催化劑B料的比例為95比5,阻燃母粒的添加量需根據電線電纜的截面積規格變化(10%~30%),主要是用于美標的XHH、XHHW、XHHW-2、RHH、RHW、RHW-2、SIS線纜,大截面電纜添加的較少,小截面積添加的較多,目的是要保證電纜通過UL-44的水平燃燒試驗,電線電纜工作電壓為1KV及以下,最高工作溫度為90℃
             
            Processing Indicator 加工工藝  
            Recommend to process with the PE extruder.  建議使用聚乙烯專用擠出機進行加工。
            Model
            牌號
            Machine Barrel Temperature
            機筒溫度
            Molding Temprature
            模頭溫度
            SEJ90-2-ZR 160-190℃ 195-200℃
             
            Physical and Electrical Properties 物理和電氣性能
            Item
            試驗項目
            Unit
            單位
            Technical requirements
            技術要求
            Tensile Strength
            拉伸強度
            MPa ≥10.5
            Elongation at Break
            斷裂伸長率
            % ≥150%
            Brittle Temperature with Low Temperature
            低溫脆化溫度

            失效數
            -25
            ≤15/30
            20℃Volume Resistivity
            20℃體積電阻率
            Ω·m ≥1.0×1013
            Flammability
            燃燒性
            / 通過FT2水平燃燒
            Air Aging Condition
            熱空氣老化條件
            121±2℃×168h
            Tensile Strength Variation After Aging
            拉伸強度變化率
            % ±30
            Elongation Variation After Aging
            斷裂伸長變化率
            % ±30
            Hot Set Test Condition
            熱延伸試驗條件
            200℃×0.2MPa×15min
            1mmthick 95 ℃ boiled 2 hours test
            一毫米厚95℃水煮
            2小時測試
            Hot Elongation
            負荷下伸長率
            % ≤100
            Permanent Deformation after Cooling
            冷卻后永久形變
            % ≤5
             
             
            日本免费无遮挡吸乳视频中文字幕,色欧美片视频在线观看,日本免费无遮挡吸乳视频中文字幕,性生大片免费观看性